BLIND RIVETS

An aluminum blind fastener which has a self-contained mechanical feature (a mandrel) which permits the formation of an upset on the blind end of the rivet and expansion of the rivet shank during rivet setting to join the component parts of an assembly. The aluminum mandrel is pulled into or against the rivet body, breaking at or near the junction of the mandrel shank and its upset end. The button head is slightly rounded and twice as wide as the body diameter. Button head is the most commonly specified head style because of its low profile and neat, finished appearance. Aluminum/aluminum rivets have the lowest tensile and shear values of all break mandrel rivets. They should be used when fastening materials with similar mechanical and physical properties.
						HEAD STYLE: BUTTON HEAD RIVET MATERIAL /FINISH: ALUMINUM MANDREL MATERIAL /FINISH: ALUMINUM
PART #	SIZE	RIVET DIA NOM. INCH (mm)	RIVET LENGTH MAX. INCH(mm)		GRIP RANGE INCH(mm)		DRILL # & HOLE SIZE (mm)	HEAD DIA.NOM. INCH (mm)	HEAD HT.MAX. INCH (mm)	LBS/M	CARTON QUANTITY
00BAA42	#42	1/8"(.125) 3.2	.275	7.0	.063-.125	1.7-3.2	#30(.129-.133) 3.3(3.28-3.38)	.250 6.35	.040 1.02	2.9	10,000
00BAA44	#44		.400	10.2	.188-.250	4.9-6.4				3.3	10,000
00BAA46	#46		.525	13.4	.313-.375	8.0-9.5				3.7	10,000
00BAA48	#48		.650	16.5	.376-.500	9.6-12.7				3.7	10,000
00BAA62	#62	3/16"(.187) 4.8	.325	8.3	.062-.125	1.6-3.2	#11(.192-.196) 4.9(4.88-4.98)	.375 9.53	.060 1.52	7.8	5,000
00BAA64	#64		.450	11.5	.126-.250	3.3-6.4				8.6	5,000
00BAA66	#66		.575	14.6	.251-.375	6.5-9.5				9.4	5,000
00BAA68	#68		.700	17.8	.376-.500	9.6-12.7				10.75	4,000
00BAA610	#610		.825	21.0	.501-.625	12.8-15.9				11.75	4,000
00BAA612	#612		.950	24.2	.626-.750	16.0-19.1				11.75	4,000

Most products are available in smaller quantities. Custom packaging & labeling can be provided.

Mail to Sacha@scrooscoop.com with questions or comments about this website.